The RLC low profile, air defrost unit coolers are designed for maximum capacity while consuming a minimum of headroom, space and energy. These units are suitable for use with R-22, R-507, or R-404A. The units are only 15" high and are designed to mount flush with top of the cooler. The new RLC evaporators and new cabinet design features easy front access to electrical and refrigeration components. RLC units also feature extended model and capacity offering to better match with Climate Control condensing units. Advancements include plastic black fan guard design with wire guards as optional; front facing electric board for easy access and optimized space in end panels. Improved drain pan design. Motor harness and solenoid harness are easier to access from the bottom of the coil. Solenoid harness come standard. Available with PSC motor option. See product bulletin for more details.
ELC/EFC low profile, electric defrost offers the same features as the air defrost models above and are also available in 6 or 4 fins per inch models. Available with PSC motor option. See product bulletin for more details.
GLC low profile, hot gas defrost offers the same features as the air defrost models above and are also available in 6 or 4 fins per inch models. Available with PSC motor option. See product bulletin for more details.
The LAH, low velocity air defrost units, features very low coil face velocity yet provides positive, quiet air movement. This combination assures even box temperatures and high humidity at the same time. LAH unit coolers equal or outperform gravity coils but are far more economical to install. Their low, narrow construction was designed especially for installation between the rail beams in meat storage and aging rooms. The high humidity characteristics minimize shrinkage, and dehydration of produce. Model LAH has been designed for the attractive appearance and easy cleaning necessary in food processing. Model LAH is best applied to 35°F to 38°F temperature range. Available with PSC motor option. See product bulletin for more details.
Model LAL, electric defrost units, is the low velocity coil perfect for storage of fresh meats. Designed for use from +28°F. to +34°F., these units may be used for floral boxes, vegetable and fruit storage rooms and dough retarding storage, or any other application where freshness is of prime importance. The high efficiency, fast electric defrost allows the LAL to maintain room temperature and minimize incidence of sliming and the formation of bacterial growth. Available with PSC motor option. See product bulletin for more details.
The LAG hot gas defrost low velocity units feature very low coil face velocity yet provide positive, quiet air movement. This combination assures even box temperatures and high humidity at the same time. LAG unit coolers equal or outperform gravity coils but are far more economical to install. Their low, narrow construction was designed especially for installation between the rail beams in meat storage and aging rooms in the 28°F to 34°F temperature range. The high humidity characteristics minimize shrinkage and dehydration of produce. Model LAG has been designed for the attractive appearance and easy cleaning necessary in food processing. Available with PSC motor option. See product bulletin for more details.
HWA models is ideal for floral storage, fresh fruit and vegetables, dough retarding, fresh meat storage and preparations, and many other applications of 35°F. and above. The low air flow and quiet fans are classically suited for work room applications.
The generous coil surface combined with close T.D. system balance provides high humidity characteristics to minimize product shrinkage and drying. Available with PSC motor option. See product bulletin for more details.
HWE models are ideal for floral storage, fresh fruit and vegetables, dough retarding, fresh meat storage and preparations, and many other applications of +24° F. and above. The low air flow and quiet fans are classically suited for work room applications.
The generous coil surface combined with close T.D. system balance provides high humidity characteristics to minimize product shrinkage and drying. Available with PSC motor option. See product bulletin for more details.
HWG hot gas defrost unit coolers are ideal for floral storage, fresh fruit and vegetables, dough retarding, fresh meat storage and preparations, and many other applications of + 24° F. and above. The low air flow and quiet fans are classically suited for work room applications.
The generous coil surface combined with close T.D. system balance provides high humidity characteristics to minimize product shrinkage and drying. Available with PSC motor option. See product bulletin for more details.
Model TLH units are compact, medium velocity coolers designed for use in +35°F and above rooms. The low height gives more head room and allows product to be stacked higher. The center ceiling mount with dual air flow allows shelving and storage of product around all walls.
Also equipped with dual drain pans to prevent sweating, the TLH units have a heavy gauge grained aluminum cabinet that cleans easily and looks attractive. The PVC coated fan guards won’t rust or rattle.
Ease of installation and service are also part of the design. The panels on the ends quickly remove to complete access to refrigerant components and electrical terminal block, without the need to drop the fan panel/drain pan. Available with PSC motor option. See product bulletin for more details.
Model TLL is the compact, ceiling mount with only 8 5/8" height that provides maximum headroom in a commercial freezer. The center mount design allows for product to be stacked all around while air flow distributes evenly throughout the box. TLL units are designed for –20°F. to +34°F and are ideal for tight storage situations.
Standard features include a heavy gauge grained aluminum cabinet that cleans easily and looks attractive. The stainless steel screws prevent rust streaks, and the PVC coated fan guards won’t rust. The TLL unit coolers are designed to be easy to install and service. All the defrost controls are mounted and wired to a terminal board, and panels on either end remove quickly for complete access to the refrigerant components and electrical connection point. A quick disconnect, waterproof plug and receptacle is supplied with each motor. Available with PSC motor option. See product bulletin for more details.
Model HMA units are designed with superior quality and dependable performance. with features like the innovative Thermo-Flex™ coil design which carries a five-year limited guarantee against refrigerant leaks, internal grooved tubing for greater heat transfer efficiency and motors that plug into the wiring harness for easier accessibility, these units provide long life and dependability to your refrigeration application. With 10,000 to 71,000 BTUH size ranges and a modular design that is only 25 inches high, these unit coolers serve a variety of commercial and industrial applications. PSC motors come standard to help you save energy.
Models HME/HML are designed with superior quality and dependable performance. with features like the innovative Thermo-Flex™ coil design that carries a five-year limited guarantee against refrigerant leaks, internal grooved tubing for greater heat transfer efficiency and motors that plug into the wiring harness for easier accessibility, these units provide long life and dependability to your refrigeration application.
With 10,000 to 62,000 BTUH size ranges and a modular design that is only 25 inches high, these unit coolers serve a variety of commercial and industrial applications. PSC motors come standard to help you save energy.
Models HMG/HMF are designed with superior quality and dependable performance. with features like the innovative Thermo-Flex™ coil design that carries a five-year limited guarantee against refrigerant leaks, internal grooved tubing for greater heat transfer efficiency and motors that plug into the wiring harness for easier accessibility, these units provide long life and dependability to your refrigeration application.
With 16,500 to 52,000 BTUH size ranges and a modular design that is only 25 inches high, these unit coolers serve a variety of commercial and industrial applications. HMG models have 6 fins per inch; HMF models have 4 fins per inch. PSC motors come standard to help you save energy.
The RLC low profile, air defrost unit coolers are designed for maximum capacity while consuming a minimum of headroom, space and energy. These units are suitable for use with R-22, R-507, or R-404A. The units are only 15" high and are designed to mount flush with top of the cooler. The new RLC evaporators and new cabinet design features easy front access to electrical and refrigeration components. RLC units also feature extended model and capacity offering to better match with Climate Control condensing units. Advancements include plastic black fan guard design with wire guards as optional; front facing electric board for easy access and optimized space in end panels. Improved drain pan design. Motor harness and solenoid harness are easier to access from the bottom of the coil. Solenoid harness come standard. Available with PSC motor option. See product bulletin for more details.
The LAH, low velocity air defrost units, features very low coil face velocity yet provides positive, quiet air movement. This combination assures even box temperatures and high humidity at the same time. LAH unit coolers equal or outperform gravity coils but are far more economical to install. Their low, narrow construction was designed especially for installation between the rail beams in meat storage and aging rooms. The high humidity characteristics minimize shrinkage, and dehydration of produce. Model LAH has been designed for the attractive appearance and easy cleaning necessary in food processing. Model LAH is best applied to 35°F to 38°F temperature range. Available with PSC motor option. See product bulletin for more details.
Model LAL, electric defrost units, is the low velocity coil perfect for storage of fresh meats. Designed for use from +28°F. to +34°F., these units may be used for floral boxes, vegetable and fruit storage rooms and dough retarding storage, or any other application where freshness is of prime importance. The high efficiency, fast electric defrost allows the LAL to maintain room temperature and minimize incidence of sliming and the formation of bacterial growth. Available with PSC motor option. See product bulletin for more details.
HWA models is ideal for floral storage, fresh fruit and vegetables, dough retarding, fresh meat storage and preparations, and many other applications of 35°F. and above. The low air flow and quiet fans are classically suited for work room applications.
Model TLH units are compact, medium velocity coolers designed for use in +35°F and above rooms. The low height gives more head room and allows product to be stacked higher. The center ceiling mount with dual air flow allows shelving and storage of product around all walls.
Model HMA units are designed with superior quality and dependable performance. with features like the innovative Thermo-Flex™ coil design which carries a five-year limited guarantee against refrigerant leaks, internal grooved tubing for greater heat transfer efficiency and motors that plug into the wiring harness for easier accessibility, these units provide long life and dependability to your refrigeration application. With 10,000 to 71,000 BTUH size ranges and a modular design that is only 25 inches high, these unit coolers serve a variety of commercial and industrial applications. PSC motors come standard to help you save energy.
