TA reach-in evaporators are thin units which mount in the top of a refrigerator and make the entire top shelf area usable. The attractive low silhouette makes this unit particularly desirable for display type refrigerators. It can also be used in back bars, under counter cabinets or wherever space is at a premium.
Drain fitting at 45° angle so drain can be run to back or bottom of refrigerator. Room for expansion valve inside so that it's out of sight. Model TA is available with optional coated coil for corrosion protection (use model designation TAK).
Low temperature TL reach-in evaporators have a completely automatic defrost system. Mounted in the top of a refrigerator, its extremely compact cabinet makes it possible to utilize the entire top shelf area for storage. Having a normal operating range of +15°F. to –20°F., this unit is ideally suited for such applications as commercial freezers, ice cream boxes, bakery freezers and dual-temp reach-in boxes. Mechanical contact is provided between the heater elements and the drain pan, insuring a warm pan during the defrost cycle. Sufficient space is provided to mount the expansion valve within the cabinet. Systems for both 115 volt and 208-230 volt operation are available.
Extended Thin Profile LTA & LTL unit cooler is the most compact designed unit for reach in display cases. The unit's low height design allows the unit to 'hide' at the top of the cooler, which gives the case a cleaner look and also allows for more room for shelves and product. These units have front access end panels for easy access to the refrigerant and electrical compartments, along with modular front access panels that make it easy to access the motors. Internally enhanced tube design produces better unit performance.
These unit coolers are ideal for refrigerated reach-ins. It mounts to the top of the refrigerator and discharges cold air against the back wall. With this air flow pattern, the air is not blasted on the product but is diffused along the back wall and then gently drawn across the product as it returns to the unit; thus, uniform temperatures are maintained throughout the refrigerator. In addition, door sweating and refrigeration loss due to door opening is greatly reduced because the air is not discharged against the doors. Mounting is made easy by means of aluminum hangers that automatically space the unit the correct distance from the back wall. The expansion valve fits inside, out of sight. Model C is available with an optional coated coil (designated as model CK) for corrosion protection.
VA reach-in evaporators are deluxe units designed for use in small reach-ins, back bar and under counter refrigerators, and many other applications where a small, compact unit is required. The thermal expansion valve mounts inside of the unit. The unit can be mounted from the ceiling or off the back or end walls, or can be used in mullion application. VA is available with an optional coated coil for corrosion protection (use model designation VAK).
The back bar unit cooler is available in either air or electric defrost. These compact, wall-mounted units are suitable for 35°F to 40°F (BBM medium temp. models) and 0°F to -10°F (BBL low temp models) undercounter reach-in fixtures. Motors are thermally protected and lifetime lubricated. Fan blades and guards are molded from corrosion-proof Lexan®. Housing is made of grained aluminum for long life and easy cleaning.
Standard mullion unit coolers are ideal for use in under-counter reach-in refrigeration. The thin line design allows the unit to be mounted behind a mullion with sufficient clearance for the installation of tray slides. KMK has a unique fan arrangement allowing air to be drawn into the top of the unit, pulling return air from both sides of the mullion. This arrangement allows the coldest air to be in contact with drop-in trays.
The versatile design of these compact mullions is also adaptable for mounting on the back wall or ends of a beverage cooler. The finned coil of KMK is protected by special coating as standard.
Reverse air mullion unit coolers are ideal for use in under-counter reach-in refrigeration. The thin line design allows the unit to be mounted behind a mullion with sufficient clearance for the installation of tray slides. RAMK or Reverse Air Mullion draws air to the coil at the bottom and discharges the cooled air out the top. This arrangement allows the coldest air to be in contact with drop-in trays.
The versatile design of these compact reverse air mullions is also adaptable for mounting on the back wall or ends of a beverage cooler. The finned coil of RAMK is protected by special coating as standard.
This twin flow unit cooler is a compact two-way design with medium velocity airflow. The unit is mounted flush to the ceiling and draws air in to the fan and discharges out both sides. The air pattern reduces air loss when doors are opened and the medium velocity reduces product drying. Twin flow units are for temperatures of 35°F. and higher. Box temperatures are kept more constant throughout and fresh products last longer. Seven sizes are available with BTUH from 900 to 5,500 at 10°T.D. The BTO is available with an optional coated coil for corrosion protection (use model designation BTOK).
This Dual Aire unit cooler is used wherever a small, compact unit is required, such as salad boxes, back bars and direct draw boxes. It can be mounted on the ceiling or wall. The Model U unit draws air in to the front and discharges it out both sides to insure proper distribution of cool air and thus maintain a uniform box temperature.
U is available with an optional coated coil for corrosion protection (use model designation UK). Flare Connections.
TA reach-in evaporators are thin units which mount in the top of a refrigerator and make the entire top shelf area usable. The attractive low silhouette makes this unit particularly desirable for display type refrigerators. It can also be used in back bars, under counter cabinets or wherever space is at a premium.
Low temperature TL reach-in evaporators have a completely automatic defrost system. Mounted in the top of a refrigerator, its extremely compact cabinet makes it possible to utilize the entire top shelf area for storage. Having a normal operating range of +15°F. to –20°F., this unit is ideally suited for such applications as commercial freezers, ice cream boxes, bakery freezers and dual-temp reach-in boxes. Mechanical contact is provided between the heater elements and the drain pan, insuring a warm pan during the defrost cycle. Sufficient space is provided to mount the expansion valve within the cabinet. Systems for both 115 volt and 208-230 volt operation are available.
These unit coolers are ideal for refrigerated reach-ins. It mounts to the top of the refrigerator and discharges cold air against the back wall. With this air flow pattern, the air is not blasted on the product but is diffused along the back wall and then gently drawn across the product as it returns to the unit; thus, uniform temperatures are maintained throughout the refrigerator. In addition, door sweating and refrigeration loss due to door opening is greatly reduced because the air is not discharged against the doors. Mounting is made easy by means of aluminum hangers that automatically space the unit the correct distance from the back wall. The expansion valve fits inside, out of sight. Model C is available with an optional coated coil (designated as model CK) for corrosion protection.
VA reach-in evaporators are deluxe units designed for use in small reach-ins, back bar and under counter refrigerators, and many other applications where a small, compact unit is required. The thermal expansion valve mounts inside of the unit. The unit can be mounted from the ceiling or off the back or end walls, or can be used in mullion application. VA is available with an optional coated coil for corrosion protection (use model designation VAK).
The back bar unit cooler is available in either air or electric defrost. These compact, wall-mounted units are suitable for 35°F to 40°F (BBM medium temp. models) and 0°F to -10°F (BBL low temp models) undercounter reach-in fixtures. Motors are thermally protected and lifetime lubricated. Fan blades and guards are molded from corrosion-proof Lexan®. Housing is made of grained aluminum for long life and easy cleaning.
Standard mullion unit coolers are ideal for use in under-counter reach-in refrigeration. The thin line design allows the unit to be mounted behind a mullion with sufficient clearance for the installation of tray slides. KMK has a unique fan arrangement allowing air to be drawn into the top of the unit, pulling return air from both sides of the mullion. This arrangement allows the coldest air to be in contact with drop-in trays.
Reverse air mullion unit coolers are ideal for use in under-counter reach-in refrigeration. The thin line design allows the unit to be mounted behind a mullion with sufficient clearance for the installation of tray slides. RAMK or Reverse Air Mullion draws air to the coil at the bottom and discharges the cooled air out the top. This arrangement allows the coldest air to be in contact with drop-in trays.
This twin flow unit cooler is a compact two-way design with medium velocity airflow. The unit is mounted flush to the ceiling and draws air in to the fan and discharges out both sides. The air pattern reduces air loss when doors are opened and the medium velocity reduces product drying. Twin flow units are for temperatures of 35°F. and higher. Box temperatures are kept more constant throughout and fresh products last longer. Seven sizes are available with BTUH from 900 to 5,500 at 10°T.D. The BTO is available with an optional coated coil for corrosion protection (use model designation BTOK).
This Dual Aire unit cooler is used wherever a small, compact unit is required, such as salad boxes, back bars and direct draw boxes. It can be mounted on the ceiling or wall. The Model U unit draws air in to the front and discharges it out both sides to insure proper distribution of cool air and thus maintain a uniform box temperature.
